基于TLE的弹道系数计算方法及应用分析

针对仅使用两行要素（Two Line Element，TLE）作为数据源的应用需求，研究了基于TLE轨道衰减的弹道系数计算方法。介绍了一种常用的基于两组TLE的直接计算法，分析TLE选取间隔对结果精度的影响；提出了一种基于多组TLE的迭代计算方法，以降低异常TLE对计算结果的影响；从弹道系数计算效果、在再入预报中的应用等方面对这两种方法进行比较分析。结果表明，两种方法各有优劣，基于多组TLE的迭代计算法稳定性更高、受TLE精度的影响更小；由于数据区间更短，基于两组TLE的计算结果对短期轨道衰减特性反应得更准确，用于临近再入时的预报效果更好。     

Feasibility evaluation of failure models for predicting forming limit of metal foils

Forming limit of metal foil is an important index to evaluate its formability, and is of considerable significance to improve the quality of products. The ductile fracture (DF) behavior in microscale plastic deformation is remarkably affected by the geometry and grain size. To explore the size-dependent forming limit curve (FLC), the Holmberg and Marciniak tests of SUS304 foils with the thicknesses of less than 0.1 mm and diverse grain sizes were performed. In addition, the validity and feasibility of three types of existing failure models including Swift/Hill, Marciniak-Kuczynski (M-K) and DF criteria for predicting the micro-scaled FLCs were discussed. It is found that the Swift/Hill model possesses the worst accuracy with predicting deviation above 50%. Four classical DF criteria including Freudenthal, Ayada, Brozzo and Oh show great difference, and Oh model considering plastic anisotropy presents the best precision. The predicted deviation of M-K model is aggravated with increasing grain size and decreasing foil thickness, which is attributed to the intensified free surface roughening and transformation of fracture mechanism with miniaturization. This research thus provides a deeper understanding and valuable reference for the widespread application of FLC in microforming.     

Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

Effect of curing condition on bonding quality of scarf-repaired composite laminates

Both single-face vacuum bag curing (SVC) and double-face vacuum bag curing (DVC) can be used in scarf repair of composite structures. But different curing conditions caused by the sealing state may affect the bonding quality of scarf-repaired structures. In this paper, the effect of curing condition on bonding quality of scarf-repaired laminates was experimentally investigated in terms of surface profiles, moisture absorption curves and section profiles. In order to further explore the moisture absorption mechanism, finite element model of the repaired laminates using DVC was established with moisture diffusion of both the adhesive and composite laminates considered. This model was verified by experimental results. Based on the model of DVC case, the model of SVC case was built by changing moisture absorption parameters of the adhesive. Results show that SVC reduces the bonding quality, mainly reflecting in more adhesive inner voids and patch-to-parent dislocation. And SVC increases moisture absorption rate and moisture equilibrium content of the adhesive, and its effect on the former is far greater than that on the latter.     

A user-friendly yield criterion for metals exhibiting tension-compression asymmetry

The aim of this paper is to model the yielding asymmetry of pressure-insensitive metals, including but not limited to Ni₃Al alloys. The main focuses are put on the flexibility and manipulative convenience. The parameters of theory are kept to a minimum and can be determined by as few tests as possible. These requirements are fulfilled by constructing a yield function using the second and third-invariants of a linearly transformed stress tensor. The proposed yield criterion has a simple mathematical form and has only seven parameters when used in three-dimensional stresses. Compared with existing theories, the new yield criterion has much fewer parameters, which makes it very convenient for practical applications. The coefficients of the criterion are identified by an error minimization procedure. Applications to a Ni₃Al based intermetallic alloy as well as a Cu-Al-Be shape memory alloy and comparison to other criteria show that the proposed criterion has nearly the same predictive ability and flexibility with other criteria. The proposed yield criterion can estimate the coefficients by using less data, which is a big advantage compared with other similar theories, especially when there is a limited number of experimental data.     

Degradation monitoring in Silvo-pastoral systems: A case study of the Mediterranean region of Turkey

To identify policies that will promote positive effects and mitigate negative ones of grazing is a major challenge in the Silvo-pastoral system. This paper presents the role of examining land-cover change trajectories by remote sensing imagery in grazing policy monitoring. The study was conducted for Duzlercami forest ecosystem located in the Mediterranean geographical region of Turkey and administrated by the General Directorate of Forestry (GDF) of the Ministry of Forestry and Water Affairs. Time series land-cover datasets from Landsat images between 1988 and 2016 were collected and classified. To link the conversions among trajectories and grazing policy, class level landscape metrics derived from the classified images were used. To validate the approach, yearly grazing-plans managed by GDF and populations of livestock were used. Results of this research have indicated that even though there is a yearly grazing plan, overgrazing can happen on the pilot site, and it can be easily identified by the destruction of woody vegetation. The notable correlation (r²?=?0.89) between degraded woody vegetation and cattle population has occurred in the last 30?years in the landscape, and Landsat imagery can effectively support the grazing policy mapping and monitoring.     

再入飞行器自适应最优姿态控制

针对再入飞行器姿态控制问题，应用自适应动态规划（ADP）理论设计了姿态控制器。将再入飞行器的姿态控制建模为非线性系统的最优控制问题，提出单网络积分型强化学习（SNIRL）算法进行求解，该算法简化了积分型强化学习（IRL）算法在迭代计算中的执行-评价双网络结构，只需要采用评价网络估计值函数就可以求得最优控制律，其收敛性得到了理论证明。基于SNIRL算法设计了自适应最优控制器，并证明了闭环系统的稳定性。通过数值仿真校验了SNIRL算法比IRL算法计算效率更高，收敛速度更快，并校验了自适应最优姿态控制器的有效性 。     

系统参数对电动力绳系动力学的影响

将电动力绳系(EDT)的主星质量、子星质量、绳系质量以及绳系中的电流视为系统参数，研究这些参数对系统的摆动动力学和轨道动力学的影响。哑铃模型下的电动力绳系摆动动力学方程存在不稳定的周期解，通过Floquet理论来衡量周期解的不稳定程度，从而研究各系统参数对摆动动力学的影响。建立了用春分点轨道元素的形式描述的电动力绳系轨道动力学方程，并以降轨时间来衡量电动力绳系的降轨效率，从而研究系统参数对轨道动力学的影响。运用算例对周期解迁移矩阵的特征值、降轨时间随各系统参数的变化关系进行了仿真，分别得出了各系统参数对系统摆动动力学和轨道动力学的影响。综合本文的仿真结果，并考虑实际发射及空间运行中的其它因素，对电动力绳系的设计和降轨策略提出了建议。     

空间太阳能电站统一调度设计及电能管理分析

针对多旋转关节空间太阳能电站(Space Solar Power Station, SSPS)，提出一种环形拓扑的电力系统架构。基于功率分层准则对SSPS电力拓扑架构进行设计，提出U1~U7共7个层级、母线电压5000V、功率等级为MW的太阳能电站电力系统。针对分层架构中多太阳电池阵子阵并联(U6层)，提出分层功率平衡统一控制策略，对MPPT控制、MPPT控制+稳定直流母线电压混合控制、MPPT算法+下垂稳定直流母线电压混合控制三种控制方法开展仿真分析。结果表明，提出的基于虚拟阻抗的下垂控制策略可以有效调节、分配功率，解决了空间发电站母线电压无法稳定的问题。     

横向振动下螺栓连接失效及影响因素研究

针对螺栓连接结构在横向振动下的失效问题进行试验研究,首先,对比相同条件下普通螺母与防松螺母的失效过程,结果表明普通螺母仅出现松动失效,而防松螺母会先出现部分松动,再因螺栓根部疲劳断裂而完全失效。同时在不同类型防松螺母中,Hard-lock螺母和施必牢螺母防松效果明显优于其他防松螺母。其次,考察拆卸次数、振动频率、幅值等因素对螺栓连接失效的影响规律,发现多次拆卸会改变普通螺母的失效形式;相对于振动频率,振动幅值和预紧力对螺栓失效的影响较大。